Siemens OpenStage Key Module Operation Manual Download Page 68

Page: 68 / 215

Step by step

Enhanced phone functions

Using the key Push-Pull

If the function key Push-Pull has been configured by ser-
vice personnel, you can use it for the following func-
tions:
•

Consultation (return to waiting call or waiting confer-
ence)

•

Toggle/Connect

•

Acceptance of a second call

•

Acceptance of a group call

Second call

You hear a call waiting tone. Information for the call is
displayed.

Press the flashing "Push-Pull" function key. You pick up
the waiting call. The LED lights up.

Toggle/Connect

[

You are connected with two parties. One party is on
hold. The "Push-Pull" function key illuminates.

Press the "Push-Pull" function key to switch to the other
party. The first party is placed on hold.

Consultation

[ j

You call the second party. The second party does not
answer.

Press the "Push-Pull" function key to return to the wait-
ing party or conference.

Group call

[

You are connected with a party. A group call is waiting.
Information for the group call is displayed.

Press the flashing "Push-Pull" function key. You pick up
the group call, the first party is placed on hold. The LED
lights up.

Summary of Contents for OpenStage Key Module
























































































































































































































Search results

Summary of Contents for OpenStage Key Module

Reviews:

Related manuals for OpenStage Key Module

Brands by name

Popular brands

Siemens OpenStage Key Module, Operation Manual

Search results

Summary of Contents for OpenStage Key Module

Reviews:

Related manuals for OpenStage Key Module

Brands by name

Popular brands