Siemens OpenStage Key Module Operation Manual Download Page 158

Page: 158 / 215

Step by step

Making calls in an executive-secretary team

158

Using a second (executive) telephone

Prerequisite:

A second phone is configured for the ex-

ecutive. A "Group Park" sensor key is programmed on
the first and second executive phones.

Parking a call on the first phone:

Press the "Group Park" programmed sensor key. The
LED lights up.

Continuing a call on the second phone:

Lift the handset.

Press the "Group Park" programmed sensor key.

Activating/deactivating a second
executive call

On the executive phone, you can configure calls to go
to the secretary phone when you are on a call. If you are
on a call and are expecting another important call, it may
be useful to activate the second call feature.

Open the program/service menu

Page 43.

Select and confirm the option shown.

Confirm.

Confirm

confirm.

Feature settings?

Camp-on?

Activate?

Deactivate?

Summary of Contents for OpenStage Key Module
























































































































































































































Search results

Summary of Contents for OpenStage Key Module

Reviews:

Related manuals for OpenStage Key Module

Brands by name

Popular brands

Siemens OpenStage Key Module, Operation Manual

Search results

Summary of Contents for OpenStage Key Module

Reviews:

Related manuals for OpenStage Key Module

Brands by name

Popular brands