Siemens OpenStage Key Module Operation Manual Download Page 156

Page: 156 / 215

Step by step

Making calls in an executive-secretary team

156

Accepting calls for the executive phone
at the secretary phone

When a call is received for the executive phone, the
secretary phone rings.

Lift the handset.

Press the key and enter speakerphone mode.

Accepting calls for the executive phone

when already on a call

You are conducting a call.
The executive phone receives a call.

[

Ask your call partner to wait.

Press the "Pickup" (

Page 108) programmed sensor

key.

Ending the call and returning to the first call:

Press the key shown.

Continue the call with your initial call partner.

Transferring a call to the executive phone

Prerequisite:

You have accepted a call for the executive

phone on the secretary phone.

Press the "executive" DSS key. You are connected to the
executive phone.

With announcement

[

Announce the call partner.

Replace the handset.

Without announcement

Replace the handset immediately.

Summary of Contents for OpenStage Key Module
























































































































































































































Search results

Summary of Contents for OpenStage Key Module

Reviews:

Related manuals for OpenStage Key Module

Brands by name

Popular brands

Siemens OpenStage Key Module, Operation Manual

Search results

Summary of Contents for OpenStage Key Module

Reviews:

Related manuals for OpenStage Key Module

Brands by name

Popular brands