Siemens OpenStage 40 HFA HiPath 4000 Operation Manual Download

Page: 32 / 120

Step by step

Making Calls – Basic Functions

Turning the microphone on and off

You can temporarily deactivate the microphone on your
handset to prevent the other party from overhearing a
conversation, for instance, with a colleague in the same
room.

Prerequisite:

You are conducting a call.

Deactivating the microphone

Press the key shown.

Activating the microphone

Press the lit key.

Calling a second party (consultation
hold)

You can call a second party while a call is in progress.
The connection to the first party is placed on hold.

Prerequisite:

You are conducting a call.

Confirm the option shown.

Enter and confirm the second party’s phone number.

Ending a consultation call

Confirm the option shown.

The consultation call is disconnected. The call with the
first party is resumed.

Consultation?

Release and return?

Summary of Contents for OpenStage 40 HFA HiPath 4000

























































































































Search results

Summary of Contents for OpenStage 40 HFA HiPath 4000

Reviews:

Related manuals for OpenStage 40 HFA HiPath 4000

Brands by name

Popular brands

Siemens OpenStage 40 HFA HiPath 4000, Operation Manual

Search results

Summary of Contents for OpenStage 40 HFA HiPath 4000

Reviews:

Related manuals for OpenStage 40 HFA HiPath 4000

Brands by name

Popular brands