manualshive.com logo in svg

Siemens OP15, Equipment Manual, Page: 51 / 177

Share
Download
Siemens OP15 Equipment Manual Download Page 51

7-1

Manual OP5, OP15 
( ) J31069-D0840-U001-A2-7618

Message Handling

Incidents and states in the control process are shown in message form on the
OP display. A message consists of static text as a minimum. If required, vari-
ables are integrated into a message.

The following types of message are displayed on the OP:

event messages,

alarm messages and

system messages.

Event messages and alarm messages are initiated by the PLC. They are con-
figured and contain process-related information. You have to acknowledge
alarm messages.

System messages are initiated by the OP. They are not configured. They pro-
vide information on operating states of the OP or maloperations and break-
downs in communication.

Issued event messages and alarm messages are stored in separate message
buffers on the OP. Messages contained in the buffers can be displayed or out-
put to a connected printer.

Message types

Event and alarm
messages

System messages

7

Summary of Contents for OP15


















































































































































































Reviews:

No comments