Siemens OP15, Equipment Manual, Page: 46 / 177

5-4
Manual OP5, OP15
( ) J31069-D0840-U001-A2-7618
5.3 Editing Screens
Screens can be manipulated, i.e. edited, by means of entries in input fields
and combined I/O fields. To edit a screen, proceed as follows:
1. Choose the screen you wish to edit as described in section 5.2.
2. The cursor jumps to the first input field.
3. Use the RIGHT
!
or LEFT
z
arrow keys to move the cursor to the field
concerned.
4. Perform the modifications you wish to make as described in section 4.2.
5. After confirming your input, position the cursor again, if necessary, to
perform further modifications.
6. Terminate editing – for example, by pressing ESCAPE.
5.4 Printing Screens
To output a screen to a connected printer, proceed as follows:
1. Choose the screen you want to edit as described in section 5.2. The screen
directory is displayed (but not when choosing by means of a function key
or a PLC job; in these instances, the corresponding screen is printed im-
mediately).
2. Scroll with the cursor keys DOWN
#
or UP
"
to the screen number you
require or, if configured, to the screen title.
3. Press ENTER to print.
4. Terminate the action – for example, by pressing ESCAPE.
Procedure
Procedure
Screens