Siemens NK8237 IEC 60870-5-104 Installation, Configuration And Commissioning Download Page 37

Page: 37 / 80

Software installation

Secure communication for web services

Building Technologies

A6V10854379_a_en

CPS Fire Safety

25.01.2019

4. Select Install NW8204.exe.



Install Shield Wizard starts.

5. Follow the instructions in the installation wizard.

Silent installation

To automate the installation of the NW8204 tool (silent installation), use the

following command line:

"NW8204 Setup.exe"

–

Install

–

TARGETDIR="<UtilDir>"

where

stands for the path to the installation directory.

8.7

Secure communication for web services

We recommend using the HTTPS secure protocol for the NK8000 Web Server tool.

HTTPS adds an encryption layer (Secure Sockets Layer or SSL) to the standard

HTTP protocol and uses a certificate to identify the website.
A self-signed Siemens certificate is automatically installed that can perfectly

support the secure communication but causes the connecting browsers to display

one or more warnings indicating that the certificate is not issued by a trusted

certificate authority. To prevent such behavior:

⚫

Buy an SSL certificate to install on your server system. This is the common

security solution for the Internet websites. Several certificate authorities can

provide an SSL certificate for a moderate annual charge (in case of issues,

contact your local IT Manager or the Siemens customer support center).

⚫

Configure the browser of your client systems to trust the self-signed certificate.

This is a common technique for Intranet websites that are not available

publicly.

Summary of Contents for NK8237 IEC 60870-5-104

















































































Search results

Summary of Contents for NK8237 IEC 60870-5-104

Reviews:

Related manuals for NK8237 IEC 60870-5-104

Brands by name

Popular brands

Siemens NK8237 IEC 60870-5-104, Installation, Configuration And Commissioning

Search results

Summary of Contents for NK8237 IEC 60870-5-104

Reviews:

Related manuals for NK8237 IEC 60870-5-104

Brands by name

Popular brands