Siemens MTP1000 Unified Comfort Operating Instructions Manual Download Page 19

Page: 19 / 178

Overview

1.7 Apps and software options

Unified Comfort Panels
Operating Instructions, 03/2020, A5E46641217-AA

1.7

Apps and software options

SIMATIC Apps

Under "SIMATIC Apps" you will find apps developed by Siemens especially for the HMI

device.

SIMATIC app

Description

SIMATIC Edge

Via "SIMATIC Edge" you start the local edge management web page on

the HMI device.

Add-ons

Under "Add-ons" you can find apps that were not developed by Siemens. The following apps

are pre-installed license-free on the HMI device:

App

Description

Doc Viewer

With the "Doc Viewer" you can view and edit documents such as text or

Word files.

E-Mail Client

With the "E-Mail Client" you can connect to your e-mail accounts, receive

e-mails, send e-mails and import mail files from other applications.

File Browser

With the "File Browser" you can display and manage files on the HMI

device.

Media Player

You can use the "Media Player" to play audio and video files.

PDF Viewer

You can use the "PDF Viewer" to view PDF documents.

Printer Configuration

You can display and manage pre-installed printers with the "Printer

Configuration".

Web Browser

The "Web Browser" provides you with access to the Internet.

Additional information on "SIMATIC Apps", "Add-ons" and the "App Management" is

available in the section "Apps (Page 114)".

Software options

In addition to the apps, software options are available for the HMI devices. Options usually

have version-independent license keys. The available software options can be found on the

Internet (

https://mall.industry.siemens.com/mall/en/en/Catalog/Products/10360581

Summary of Contents for MTP1000 Unified Comfort



















































































































































































Search results

Summary of Contents for MTP1000 Unified Comfort

Reviews:

Siemens MTP1000 Unified Comfort, Operating Instructions Manual, Page: 19 / 178

Search results

Summary of Contents for MTP1000 Unified Comfort

Reviews: