Siemens MS Series, Instruction Manual, Page: 75 / 130

SITRANS P, MS series
75
C79000-B5674-C40-04
Technical Description
.
Opposite it is the approval plate (Figure 2, p. 75 and 4, Figure 4, p. 76). This contains
information about the hardware and firmware versions among other things..
The housing is made of die-cast aluminum. There is a round, screw cover on both
the front and back. The front cover is designed in the version "with digital indicator"
(4, Figure 3, p. 76) as a sight glass so that measured values can be read directly. The
inlet (2, Figure 3, p. 76) to the electrical connection box is located on the side, either
left or right. The opening not being used is closed by a dummy plug (e.g. 5, Figure 4,
p. 76). The PE terminal (2, Figure 4, p. 76) is at the front of the housing.
1 Model number (MLFB number)
2 Serial number
Figure 1 Example for a rating plate
Figure 2 Example for a approval plate
1
2
Not relevant
Product version connection board
Counting number
FW version
Document revision
Device type
FW: XX.YY.ZZ HW: XX.YY.ZZ