Siemens MS Series, Instruction Manual

Page: 115 / 130

SITRANS P, MS series
115
C79000-B5674-C40-04
Technical Data
■
Technical data (continued)
Certificates and approvals
Classification according to pressure
equipment directive
(DGRL 97/23/EC): For gases of fluid group 1 and
liquids of fluid group 1;
complies with requirements of
article 3, paragraph 3 (sound
engineering practice)
Explosion protection
• Intrinsically-safe version
- Intrinsic safety "i" PTB 99 ATEX 2122
- Identification II 1/2 G EEx ia/ib IIC/IIB
T4/T5/T6
- Permissible ambient temperature -40 to +185 °F/+158 °F/+140°F
- Connection to certified intrinsi-
cally-safe circuits with maximum
values:
U
i
= 30 V, I
i
= 100 mA
P
i
= 750 mW, R
i
= 300
Ω
- Effective internal inductance L
i
=
1 mH
- Effective internal capacitance C
i
=
6 nF
• Flameproof design
- Flameproof enclosure "d" PTB 99 ATEX 1160
- Identification II 1/2 G EEx d IIC T4/T6
- Permissible ambient temperature -40 °F to +185 °F/+140°F
- Connection to circuits with values: U
H
= DC 10.5 to 45 V
• Zone 2 version
- Type of protection "n" TÜV 01 ATEX 1696 X
- Identification II 3 G EEx nA L IIC T4/T5/T6
- Permissible ambient temperature -40 to +185 °F/+158 °F/+140°F
- Connection to circuits with values: U
H
= DC 10.5 to 45 V
• Explosion protection to FM Certificate of Compliance
3008490
- Identification (XP/DIP) or (IS); (NI) CL I, DIV 1, GP ABCD T4...T6;
CL II, DIV 1, GP EFG; CL III; CL
I, ZN 0/1 AEx ia IIC T4...T6; CL I,
DIV 2, GP ABCD T4...T6; CL II,
DIV 2, GP FG; CL III
- Permissible ambient temperature -40 to +185 °F/-40 to +158 °F/
-40 to +140°F
- Entity parameters Acc. to control drawing
A5E00072770A:
U
i
= 30 V, I
i
= 100 mA,
P
i
= 750 mW,
R
i
= 300
Ω,
L
i
=
0,4 mH,
C
i
=
6 nF
• Explosion protection to CSA Certificate of Compliance
2000.1153651
- Identification (XP/DIP) or (IS) CL I, DIV 1, GP ABCD T4...T6;
CL II, DIV 1, GP EFG; CL III; Ex
ia IIC T4...T6; CL I, DIV 2, GP
ABCD T4...T6; CL II, DIV 2, GP
FG; CL III
- Permissible ambient
temperature
-40 to +185 °F/-40 to +158 °F/
-40 to +140°F
- Entity parameters
Acc. to control drawing
A5E00072770A:
U
i
= 30 V, I
i
= 100 mA,
P
i
= 750 mW,
R
i
= 300
Ω,
L
i
=
0.4 mH,
C
i
=
6 nF
Communication
Load when connecting a
• HART communicator 230 to 1100
Ω
• HART modem 230 to 500
Ω
Cable 2-wire screened:
≤
3.0 km (1.86 miles)
Multi-core screened:
≤
1.5 km
(0.93 miles)
Protocol HART, version 5.x
PC/laptop requirements IBM-compatible,
main memory > 32 Mbyte,
hard disk > 70 Mbyte,
RS 232 interface,
VGA graphics
Software for PC/Laptop WINDOWS 95/98/NT 4.0
and SIMATIC PDM