Siemens MOTOX BA 2320, Operating Instructions Manual

Page: 9 / 84

General information and safety notes
1.2 Copyright
BA 2320
Operating Instructions, 02/2015, 70000004023775
9
1.2 Copyright
The copyright to these operating instructions is held by Siemens AG.
These operating instructions must not be wholly or partly reproduced for competitive
purposes, used in any unauthorized way or made available to third parties without
agreement of Siemens AG.
1.3 Intended use
The motors described in these operating instructions have been designed for stationary use
in general engineering applications.
They comply with the harmonized standards of the series EN 60034 (VDE 0530). They are
not approved for operation in hazardous zones and areas.
Unless otherwise agreed, the motors have been designed for use in plants and equipment in
industrial environments.
The motors have been built using state-of-the-art technology and are shipped in an
operationally reliable condition. Changes made by users could affect this operational
reliability and are forbidden.
Note
The performance data assumes an ambient temperature of -15 °C to +40 °C and an
installation altitude of up to 1 000 m above sea level.
In the case of other ambient temperatures and installation altitudes, please contact Technical
Support.
The motors are designed only for the area of application described in Section Technical data
(Page 65).
Do not operate the gearboxes outside the specified performance limits.
Any different operating conditions require new contractual agreements.
Equipment with degree of protection ≤ IP54 must never be used outdoors. Air-cooled
versions are designed for ambient temperatures of -15 °C to +40 °C and for an installation
altitude of up to 1 000 m above sea level. Please note any deviations to the data on the
rating plate. Conditions at the location of use must comply with all specifications on the rating
plate.
Do not climb on the motor. Do not place any objects on the motor.