Siemens MOBY ES030-K, Manual, Page: 29 / 100

6AW5451-6XX01-1K ES 030-K Manual
Subject to change without prior notice
3 - 11
RD: 08.2000
(4)J31069-D0136-U001-A0-7618
3.3 System Flags
3.3.1 Assigning the System Flags
FY Meaning
0
1
2
3
:
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
beginning 31
Reserved
New start, re-start
Test mode
Reserved
Reserved
Reserved
Set date/time
Error message for ASCII/binary conversion, start program, copy program
Reserved for keyboard image of the function keys (at the present time)
Keyboard/key switch
Display
Standard serial interface/SINEC L1 slave, input
Standard serial interface/SINEC L1 slave, output
Expansion serial interface, input
Expansion serial interface, output
MOBY Interface 1
MOBY Interface 2
Standard serial interface/SINEC L1 master, input
Standard serial interface/SINEC L1 master, output
Bar code
Automatic MOBY recognition
Receive via PROFIBUSDP
Send via PROFIBUSDP
Reserved
Keyboard image of the function keys (stored)
Magnecode driver
Available for user
3.3.2 Description of System Flag Areas
3.3.2.1 FY 1 New Start/Re-Start
Bit 7 6 5 4 3 2 1 0
Voltage return
Memory cleared
Bit 0 = Flag is
“
1", if supply voltage is switched off, then on again.
Bit 1 = Flag is
“
1", if user performs system start.
Both flags can be reset by the user program. They can be used as new start or re-start flags.
3.3.2.2 FY 2 Test Mode
Bit 7 6 5 4 3 2 1 0
1 = Test mode
The flag 2.0 can be set by the user to access the test mode (see also Chapter 6.2.2).
The program will be stopped at the next breakpoint.
Setting flag 2.0 also cancels cycle time monitoring. The error timeout interpreter" is
no longer reported (cf. chap 7.1).
3.3.2.3 FY 7 Date/Time
Set time (source = DW 3 to DW 8) 0/1 acknowledge/accept
Bit 7 6 5 4 3 2 1 0
Inhibit updating of time 0/1 enable/inhibit
(will be set by system after return of voltage)