©
Siem
ens AG
2003, C
:\P
ro
je
kt
e\Sie
m
ens\10210-
001\
CF62\Produkt\cf62_
tmo_am
_fug\fug\A65_
Set
up.f
m
77
Settings
VAR Langua
ge: en; V
A
R issue
date: 040413
left page (77)
of CF62 Leopard TMO FUG us, A31008-H6050-A50-1-4A19 (25.06.2004, 14:28)
Send Voice/Fax
b
Set this function on the phone
before
transmission so that you can switch
from voice mode to fax mode.
While the connection is being set up,
the following function is available
for two seconds:
§Voice/Fax§
Switch to
Send Voice/Fax
mode; you may now send
a fax.
Rec Voice/Fax
(
Only
if no special fax or data number
is available).
Start the required communication
program on your PC and select the
function on the phone
during
the call
(the PC will take over the connection).
End transmission
End transmission with PC software
and/or press
B
.
Rec Fax/Data
b
Your service provider has given you
a number for telephoning and a fax/
data number.
The call is signaled by a special ring-
tone and the type of call (fax or data)
is displayed.
Now start the communication pro-
gram in your PC to receive the fax/
data.
Security
§Menu§
K
m
K
Security
K
Select function.
The phone and SIM card are protected
against misuse by several security
codes.
Fixed Dial
b
(PIN2 protected)
Dialing options are limited to SIM-
protected phone numbers in the
Phonebook. If only area codes are
entered, relevant phone numbers
can be added to these manually
before dialing.
If the SIM card does not support PIN2
input, the
whole
Phonebook can be
protected with the phone code.
Last 10 Only
b
(Phone-code protected)
Only phone numbers from the call
list of "dialed numbers" (page 45)
can be dialed. This list can be filled
with phone numbers specifically for
this purpose.
First delete the call list, then create
"new entries" by dialing phone num-
bers and canceling before the con-
nection is established.
Codes
PIN Control
,
Change PIN
,
Change PIN2
,
Change Phonecode
