manualshive.com logo in svg

Siemens MindConnect IoT2040, Getting Started

Share
Download
Siemens MindConnect IoT2040 Getting Started Download Page 49

Onboarding MindConnect Elements

6.7 Transferring configuration to MindConnect Element

Getting Connected to MindSphere
Getting Started, 05/2018

49

4. Activate DHCP if a DHCP server is available in your company network or enter the

respective information for static IP address.

The following graphic shows the IP address input fields:

Figure 

6-1  IpAdress

5. Enter the proxy data area "Communication Settings" if necessary and click "Save".

– In this case, contact your network administrator to get the proxy data.

Note
If nothing else is configured manually, MindConnect Nano/IoT2040 will try to obtain IP

addresses for both adapters via DHCP.

6. Click on "Save", to complete the configuration. .

6.7

Transferring configuration to MindConnect Element

Requirement

●

A standard USB device with a single partition in FAT or FAT32 is formatted.

●

You have enabled the connection to the MindConnect Element.

●

You have configured the network settings.

Summary of Contents for MindConnect IoT2040

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands