Siemens MindConnect IoT2040 Getting Started Download Page 13

Page: 13 / 96

Getting Connected to MindSphere
Getting Started, 05/2018

Overview of MindConnect Elements

MindConnect Elements, MindConnect Nano and MindConnect IoT2040, are embedded

industrial PCs. They are able to connect to MindSphere, collect data from the field and

transfer it encrypted to MindSphere.

MindConnect Nano

MindConnect Nano is a preconfigured Industrial PC that allows connectivity to MindSphere.

The device supports the transmission of data encrypted through a secured Internet

connection to MindSphere. MindConnect Nano allows fast and easy IoT connectivity of

machines and systems. For more information refer to chapter Technical specifications of

MindConnect Nano (Page 81). The following graphic shows the MindConnect Nano:

Summary of Contents for MindConnect IoT2040

































































































Search results

Summary of Contents for MindConnect IoT2040

Reviews:

Related manuals for MindConnect IoT2040

Brands by name

Popular brands

Siemens MindConnect IoT2040, Getting Started

Search results

Summary of Contents for MindConnect IoT2040

Reviews:

Related manuals for MindConnect IoT2040

Brands by name

Popular brands