MammoReport Plus
Register 8
SPB7-420.831.20
Page 2 of 2
Siemens Medical Solutions
Rev. 01
01/05
CSPS 24
Erlangen, Germany
1 - 2
General information
1.5
Text emphasis
1.6
Explanation of abbreviations
The work steps in this document that are identified by these abbreviations should be
checked off in the Maintenance Protocol (SPB7-420.832.20...).
DANGER indicates when there is an immediate danger that leads
to death or serious physical injury.
WARNING indicates a risk of danger that may lead to death or to
serious physical injury.
CAUTION used with the safety alert symbol indicates a risk of
danger that leads to slight or moderate physical injury and/or
damage to property.
NOTICE used without the safety alert symbol indicates a risk of
danger that if disregarded leads or may lead to a potential situa-
tion which may result in an undesirable result or state other than
death, physical injury or damage to property.
NOTE contains information provided with special emphasis to
facilitate proper use of the equipment or proper execution of a
procedure, i.e. hints, tips
.
Abbreviation Explanation
SI
Safety Inspection
SIE
Safety Inspection Electrical Safety
SIM
Safety Inspection Mechanical Safety
PM
Preventive Maintenance
PMP
Preventive Maintenance, Preventive Parts Exchange, External Inspec-
tion, etc.
PMA
Preventive Maintenance Adjustments
PMF
Preventive Maintenance Function, Operating Value Check
Q
Quality Check
QIQ
Quality Check Image
QSQ
Quality Check System
SW
Software Maintenance
DANGER
WARNING
CAUTION
NOTICE
NOTE