manualshive.com logo in svg

Siemens MAMMOMAT NovationDR, Installation Instructions Manual, Page: 71 / 95

Share
Download
Siemens MAMMOMAT NovationDR Installation Instructions Manual Download Page 71

5-20 

February 5, 2004 

 

 

FFDM-S Service Manual

Upgrading the PXCM Software

NOTE:

 Typically, you will be upgrading an PXCM software only at the direction of Direct Radiography 

Corp., or if you suspect that the current software is corrupt.

To upgrade the PXCM’s software:

1. Click the Software Upgrade link on the PXCM Control Panel page, or the 

Upgrade link on any of the other PXCM pages.
The Upgrade PXCM Software page displays.

NOTE:

 For security purposes, you may be prompted to enter a login name and password before 

executing this function. For more information, refer to “Function Security Levels and Login Prompts” 
on page 5-2.

2. For the 

Select the package to be upgraded

 option, select 

siemens

.

3. Select whether you want to overwrite all of the PXCM configuration files.

If you select the 

Save reserved files

 option, specify the files you want to 

protect from being overwritten in the 

Enter Configuration files to be 

retained

 field.

Summary of Contents for MAMMOMAT NovationDR
































































































Reviews:

No comments