Siemens MAMMOMAT NovationDR, Installation Instructions Manual, Page: 67 / 95

5-16
February 5, 2004
FFDM-S Service Manual
Viewing PXCM AEC Configuration Information
NOTE: PXCM Automatic Exposure Control (AEC) configuration information is intended as an aid to
Direct Radiography Corp. Support staff in troubleshooting AEC problems. For this reason, you will
typically be using this function only at the direction of Direct Radiography Corp. Support.
To view PXCM AEC configuration information, click the Brick AEC
Configuration link on the Brick Control Panel page, or the AEC link on any of the
other PXCM pages. The Brick AEC - Status page displays, as shown on the next
page.
NOTE: For security purposes, you may be prompted to enter a login name and password before
executing this function. For more information, refer to “Function Security Levels and Login Prompts”
on page 5-2.
CAUTION
The Brick AEC page also includes a
Modify Settings
button. This function
is intended only as an aid to Direct Radiography Corp. Support staff in troubleshooting
AEC problems. Use of this function could adversely affect AEC operation.