manualshive.com logo in svg

Siemens MAMMOMAT NovationDR, Installation Instructions Manual, Page: 59 / 95

Share
Download
Siemens MAMMOMAT NovationDR Installation Instructions Manual Download Page 59

5-8 

February 5, 2004 

 

 

FFDM-S Service Manual

Upgrading Detector Software Components

NOTE:

 Typically, you will be upgrading an Detector software component only at the direction of Direct 

Radiography Corp., or if you suspect that the current software component is corrupt.

To upgrade one of the Detector’s software components:

1. Click the Software Upgrade link on the Array Control Panel page, or the 

Upgrade link on any of the other Array pages.
The Upgrade Detector Subsystem (Array) Software page displays.

NOTE:

 For security purposes, you may be prompted to enter a login name and password before 

executing this function. For more information, refer to “Function Security Levels and Login Prompts” 
on page 5-2.

2. Select the software component that you want to upgrade.

3. Click the 

Browse

 button, then navigate to and select the appropriate software 

component file from your Acquisition Workstation’s file system.
The file you selected is displayed in the 

Please select the file to transfer

 

field

CAUTION

The PXCM Web Tool does not check that the appropriate 

fi

le type has been 

selected. If you select the wrong 

fi

le to upload, you could cause the PXCM to stop 

operating.

Summary of Contents for MAMMOMAT NovationDR
































































































Reviews:

No comments