Siemens MAGNETOM Skyra fit Operator'S Manual Download Page 53

Page: 53 / 131

◾

Left mouse button:

–

Selecting or moving objects

–

Starting applications

–

Executing commands

◾

Center mouse button/wheel:

–

Changing the window values of patient images

–

Scrolling (for example, through the Patient list)

◾

Right mouse button:

–

Opening the context menu (depending on the position of the
mouse pointer)

syngo MR Workplace (optional)

The syngo MR Workplace allows for evaluation, documentation and
post-processing of previously measured images while acquiring
images at the syngo Acquisition Workplace. It accesses the database
of the host processor.

It is not possible to perform measurements at the syngo MR
Workplace. It is not connected to the MR scanner or the image
reconstruction system.

System control

Description

The system control is used to operate the system and the patient
table. It comprises control units and the Dot display.

3.2.6

3.3

3.3.1

MR system components

MAGNETOM Skyra

fit

| syngo MR E11

Print No. M6-04401.621.02.02.02

Summary of Contents for MAGNETOM Skyra fit




































































































































Search results

Summary of Contents for MAGNETOM Skyra fit

Reviews:

Siemens MAGNETOM Skyra fit, Operator'S Manual, Page: 53 / 131

Search results

Summary of Contents for MAGNETOM Skyra fit

Reviews: