manualshive.com logo in svg

Siemens MAGNETOM Skyra fit, Operator'S Manual, Page: 41 / 131

Share
Download
Siemens MAGNETOM Skyra fit Operator'S Manual Download Page 41

Protective class symbol B for
application parts

Protective class symbol BF for
application parts

System owner-related advices

Some safety instructions address the system owner. They are
included as “Safety information” in a separate operator manual, see:

System owner manual

. This manual also contains the technical

description of the system.

Coils/quality assurance

Safety instructions covering the intended use of coils and
measurement phantoms are included in a separate operator manual.
See: 

Coil operator manual

.

In case of emergency

1

Before working with the system, familiarize yourself with the
location and functionality of the emergency switches installed.

2

Report all accidents resulting in personal injury immediately to the
appropriate authorities.

3

Observe the established emergency plans (e.g. emergency plan in
case of coolant accidents, emergency plan for fire fighting).

Emergency switches

The MR system has different types of emergency switches.

Switch

Effect

Emergency

Magnet Stop

Shutting down the static magnetic
field (quenching)

E.g. in case of accidents with attracted
metal parts or in case of fire

2.3.8

2.3.9

2.4

2.4.1

Safety

2

MAGNETOM Skyra

fit

 | syngo MR E11

41

Print No. M6-04401.621.02.02.02

Summary of Contents for MAGNETOM Skyra fit




































































































































Reviews:

No comments