26
Troubleshooting with DIFS16P
R630/R640; M440/M450
TD00-400.840.10.03.02
Siemens
02.08
CS SD SP/CO
Page 26 of 32
Medical Solutions
Known issues in troubleshooting the Celsius PCs
5.4
Defective hard disk not detected by DIFS
0
Sometimes DIFS is not able to detect a defective hard disk. But you can check the hard
disks during the boot operation. Press the “Pause” button when the following screen is
shown (just an example).
Fig. 7:
Defective hard disk
In this example, hard disks 1 to 3 (ID 0 to 2) are defective.
BIOSLOG-Errors
0
BIOSLOG-Errors are logged failures which have appeared in the past. These errors don’t
indicate an already existent problem. They only should be handled as a hint to the may
defective component.
Fig. 8:
Clear BIOSLOG
To clear the BIOSLOG-Errors please go to the FreeDOSPrompt of the DIFS-Medium and
type “bioslog –clear”. Restart the PC and run DIFS again.
