background image

en 

Cleaning and servicing

12

3.

ATTENTION!

 Falling grease filters may damage the

hob below.

Grip below the grease filter with one hand.

Open the locks on the grease filters.

4.

Remove the grease filters from the holders.
To prevent grease from dripping, hold the grease fil-
ter horizontally.

Cleaning grease filters in the
dishwasher

The grease filters filter the grease from the cooking va-
pour. Regularly cleaned grease filters guarantee a high
level of grease removal.

WARNING ‒ Risk of fire!

Fatty deposits in the grease filters may catch fire.

Clean the grease filters regularly.

ATTENTION!

The grease filters may become damaged if they are
squeezed.

Do not squeeze the grease filters.

Note: 

When cleaning the grease filter in the dish-

washer, light discolouration may occur. This discoloura-
tion has no effect on the performance of the metal
grease filters.

Requirement:

 The grease filters have been removed.

1.

Observe the information regarding the cleaning
agents. 
→ 

"Cleaning products", Page 10

2.

Place the grease filters loosely into the dishwasher.
Do not clean heavily soiled grease filters with
utensils.
Use special grease solvent for stubborn dirt. You
can obtain grease solvents from after-sales service
or the online shop.

3.

Start the dishwasher.
Select a temperature of no more than 70 °C.

4.

Allow the grease filters to drain.

Cleaning grease filters manually

The grease filters filter the grease from the cooking va-
pour. Regularly cleaned grease filters guarantee a high
level of grease removal.

WARNING ‒ Risk of fire!

Fatty deposits in the grease filters may catch fire.

Clean the grease filters regularly.

Requirement:

 The grease filters have been removed.

1.

Observe the information regarding the cleaning
agents. 
→ 

"Cleaning products", Page 10

2.

Soak the grease filter in hot soapy water.
Use special grease solvent for stubborn dirt. You
can obtain grease solvents from after-sales service
or the online shop.

3.

Use a brush to clean the grease filters.

4.

Rinse the grease filters thoroughly.

5.

Allow the grease filters to drain.

Fitting grease filters

ATTENTION!

Falling grease filters may damage the hob below.

Grip below the grease filter with one hand.

1.

Fit the grease filters.

2.

Fold the grease filters upwards and engage the
locks.

3.

Make sure that the locks engage.

4.

Close the filter cover.

5.

Make sure that the filter cover locks engage cor-
rectly.

Replacing the batteries in the remote
control

WARNING ‒ Risk of injury!

¡

Children may swallow batteries.

Keep batteries out of the reach of children.

Keep an eye on any children when you are repla-
cing batteries.

¡

Batteries may explode.

Do not charge the batteries.

Do not short-circuit the batteries.

Do not throw batteries into a fire.

ATTENTION!

¡

Improper handling of batteries.

Do not short-circuit the terminals.

Use the specified type of batteries only.

Do not use different battery types together.

Do not use new and used batteries together.

Do not use rechargeable batteries.

¡

Leaking batteries may damage the remote control.

Remove the batteries if you are not using the re-
mote control.

Safely dispose of the empty or defective batteries
in an environmentally friendly manner.

1.

Remove the cover.

Summary of Contents for LR97CAQ20

























Reviews: