Siemens LOGO!, Manual

Page: 298 / 534

Configuring LOGO!
7.2 Setting the default values for LOGO!
LOGO!
298
Manual, 04/2011, A5E03556174-01
7.2.3 Setting the menu language
The language of the LOGO! menus can be one of ten predefined languages:
CN (Chinese) DE (German) EN (English) ES (Spanish) FR (French)
IT (Italian) NL (Dutch) RU (Russian) TR (Turkish) JP (Japanese)
To set the menu language in parameter assignment mode:
1. Select parameter assignment mode (Page 288).
2. On the parameter assignment menu,
select 'Set': Press or
3. Confirm 'Set..': Press OK
4. On the Set menu, select 'Menu Lang': Press or
5. Confirm 'Menu Lang': Press OK
6. Move the '>' cursor to the language
of your choice: Press or
7. Confirm language selection. Press OK
To set the menu language in programming mode:
If you want to set the menu language in programming mode, select 'Setup' in the main menu,
then menu 'Menu Lang'. You can now set the menu language as described earlier (as of
step 6.).
To reset LOGO! to its default language setting:
If you want to restore LOGO! to its default language setting (English), do the following:
1.
Switch off LOGO! and then switch it on again.
2. When an hourglass icon displays, press , and OK together until the English menu
entries appear.