4 Operating the Application Example
Frei verwendbar House Control with Master-Slave - LOGO! Set 9
Entry ID: 64143308, V2.2, 09/2018
33
©
S
ie
m
e
n
s
A
G
2018
A
ll
r
ig
h
ts
r
e
s
e
rv
e
d
4.2.1
Operating example for use of the LOGO! display and LOGO! TDE:
Central blind control
Table 4-2
No.
Action/response
LOGO! display and LOGO! TDE
1.
Use the cursor keys to go to the blind control menu.
2.
Press ESC+ C1▲.
→ All blinds move up.
3.
While the blinds travel upwards, press ESC+C2
▼.
→ The blinds are stopped.
4.
Now press ESC+C2
▼(0.5 seconds).
→ The blinds now move downwards again, i.e. in
reverse direction.
4.3
Activating the panic function for the lights
Table 4-3
No.
Action/response
LOGO! display and LOGO! TDE
1.
Press one of the light buttons in the house for more
than 3 seconds.
→ All lights in the house and the exterior lighting are
switched on. In addition, a warning message is
displayed on the LOGO! display and on the
LOGO! TDE.
