Step 2:
Remove all wires from the control module and remove the coil cover
along with the control module.
Coil Replacement for Mechanically Held Contactors
Step 1:
Check the position of the manual operating tabs to verify the contactor
is in the unlatched state. If in the latched state, push both tabs forward
and release. The Contactor should return to the unlatched state.
Class LC Electrically Held Lighting Contactor
(Convertible to Mechanically Held)
Catalog numbers LCE00C*
Page 4 of 6
Step 3: Remove coil assembly
Siemens Industry, Inc.
A5E31166555A-001
Unlatched state
Latched state
Step 4: Replace with new coil.
Step 5: Replace with new coil.
2
3
4
5
