background image

en

2

Table of contents

enInstructi

ons 

for 

installat

ion 

and 

use

INSTRUCTION MANUAL.......................................................... 2

8

Intended use................................................................... 2

(

Important safety information........................................ 2

7

Environmental protection ............................................. 4

Ç

Operating modes ........................................................... 4

1

Operating the appliance................................................ 5

2

Cleaning and maintenance ........................................... 8

3

Trouble shooting............................................................ 9

4

Customer service ........................................................ 10

INSTALLATION INSTRUCTIONS........................................... 11

(

Important safety information...................................... 11

K

General information..................................................... 13

5

Installation.................................................................... 14

INSTRUCTION MANUAL

Produktinfo

Additional information on products, accessories, 

replacement parts and services can be found at 

www.siemens-home.com

 and in the online shop 

www.siemens-eshop.com

8

Intended use

Intended 

use

Read these instructions carefully. Only then 

will you be able to operate your appliance 

safely and correctly. Retain the instruction 

manual and installation instructions for future 

use or for subsequent owners.
The appliance can only be used safely if it is 

correctly installed according to the safety 

instructions. The installer is responsible for 

ensuring that the appliance works perfectly at 

its installation location.

This appliance is intended for domestic use 

and the household environment only. The 

appliance is not intended for use outside. Do 

not leave the appliance unattended during 

operation. The manufacturer is not liable for 

damage which is caused by improper use or 

incorrect operation.
This appliance is intended for use up to a 

maximum height of 2000 metres above sea 

level.
This appliance may be used by children over 

the age of 8 years old and by persons with 

reduced physical, sensory or mental 

capabilities or by persons with a lack of 

experience or knowledge if they are 

supervised or are instructed by a person 

responsible for their safety how to use the 

appliance safely and have understood the 

associated hazards.
Children must not play with, on, or around the 

appliance. Children must not clean the 

appliance or carry out general maintenance 

unless they are at least 8 years old and are 

being supervised.
Keep children below the age of 8 years old at 

a safe distance from the appliance and power 

cable.
Check the appliance for damage after 

unpacking it. Do not connect the appliance if it 

has been damaged in transport.
This appliance is not intended for operation 

with an external clock timer or a remote 

control.

(

Important safety 

information

Important

 safety i

nformatio

n

:

Warning

Danger of suffocation!

Packaging material is dangerous to children. 

Never allow children to play with packaging 

material.

:

Warning

Danger of death!

Risk of poisoning from flue gases that are 

drawn back in.

Summary of Contents for LC98BE542

















Reviews: