background image

Imp

ort

Ap

plia

nce

s.c

om

THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.

Cleaning and maintenance       

en

13

Resetting the connection

You can reset the saved connections to the home 

network and to Home Connect at any time.
Press and hold the 

#

 and 

!

 symbols until the 

D

 symbol goes out. You will hear an audible signal.

About data protection

When your appliance is connected for the first time to a 

WLAN network, which is connected to the Internet, your 

appliance transmits the following categories of data to 

the Home Connect server (initial registration):

Unique appliance identification (consisting of 

appliance codes as well as the MAC address of the 

installed WiFi communication module).

Security certificate of the WiFi communication 

module (to ensure a secure IT connection).

The current software and hardware version of your 

domestic appliance.

Status of any previous resetting to factory settings.

This initial registration prepares the Home Connect 

functions for use and is only required when you want to 

use these Home Connect functions for the first time.

Note: 

Ensure that the Home Connect functions can be 

used only in conjunction with the Home Connect app. 

Information on data protection can be accessed in the 

Home Connect app.

Declaration of Conformity

BSH Hausgeräte GmbH hereby declares that the 

appliance which features Home Connect is in 

accordance with the basic requirements and the other 

relevant provisions of the directive 2014/53/EU.
A detailed RED Declaration of Conformity can be found 

online at www.siemens-home.bsh-group.com on the 

product page of your appliance with the additional 

documents.

2.4 GHz band: max. 100 mW 

5 GHz band: max. 100 mW

2

Cleaning and maintenance

Cleaning and maintenance

:

Warning – Risk of burns! 

The appliance becomes hot during operation. Allow the 

appliance to cool down before cleaning.

:

Warning

Risk of electric shock! 

Penetrating moisture may result in an electric shock. 

Clean the appliance using a damp cloth only. Before 

cleaning, pull out the mains plug or switch off the 

circuit breaker in the fuse box.

Risk of electric shock! 

Do not use any high-pressure cleaners or steam 

cleaners, which can result in an electric shock.

:

Warning – Risk of injury! 

Components inside the appliance may have sharp 

edges. Wear protective gloves.

Caution!

There is a risk of surface damage if you do not peel off 

the protective film.Remove the protective film from all 

parts of the appliance before using the appliance for the 

first time.

Cleaning agents

To ensure that the different surfaces are not damaged 

by using the wrong cleaning product, follow the 

instructions in the table. Do not use any of the following:

Harsh or abrasive cleaning agents, e.g. scouring 

powder or liquid scouring cleaner,

Cleaning products with a high alcohol content,

Hard scouring pads or cleaning sponges,

Pressure washers or steam cleaners,

Cleaning products that dissolve limescale,

Aggressive all-purpose cleaning products,

Oven spray.

Note: 

Wash new sponge cloths thoroughly before use.

Note: 

Follow all instructions and warnings included with 

the cleaning products.

y

BE

BG

CZ

DK

DE

EE

IE

EL

ES

FR

HR

IT

CY

LV

LT

LU

HU

MT

NL

AT

PL

PT

RO

SI

SK

FI

SE

UK

NO

CH

TR

5 GHz Wi-Fi: for indoor use only

Summary of Contents for LC91BUR50


























Reviews: