6
3.
Insert the grease filters (see removal and
installation of the metal-mesh grease
filters).
Removing the filter:
The filters are removed in reverse
sequence.
Replacing the activated carbon filters:
❑
During normal operation (1 to 2 hours
per day) the activated carbon filters
should be replaced approximately 1 x
year.
❑
The activated carbon filters are available
from specialist outlets (see Optional
accessories).
❑
Use only original filters.
The appliance is then guaranteed to
function perfectly.
Disposal of old activated carbon filters:
❑
Activated carbon filters do NOT contain
any harmful substances. They can
therefore be disposed of as household
refuse.
Inserting the filter:
1.
Remove the metal filters (see "Removing
and inserting the metal grease filters").
2.
Insert an activated carbon filter on the
right and left of the fan motor and rotate
the filters until they lock into position.
1.
2.
Filters and maintenance
2.
Clean the filters.
3.
Insert the clean filters back into the
hood.
Activated carbon filter:
For neutralizing odours in recirculating
mode.
Caution:
As the filter becomes more and more
saturated with grease, there is an increased
risk of fire and the function of the extractor
hood may be impaired.
Important:
Change the activated carbon filter promptly
to prevent the risk of fire from the
accumulation of heat when deep-fat frying
or roasting.
Removing and inserting the metal grease
filters:
1.
Press the catch on the grease filters
inwards and fold the filters down.
At the same time take hold of the under-
side of the grease filters with your other
hand.
