Siemens KI V Series, User Manual

Page: 38 / 102

en
38
Appliance self-test
Your appliance features an automatic
self-test program which shows you
sources of faults which may be repaired
by customer service only.
Starting the appliance self-test
Fig.
"
1. Switch off the appliance with the On/
Off button 1 and wait 5 minutes.
2. Switch on the appliance with the On/
Off button 1 and hold down
the temperature setting button 4 for
3-5 seconds within the first
10 seconds until 2 °C is lit
on the temperature display 2.
The self-test programme starts, when
the temperature displays lit up in
succession.
When after a short time the appliance
displays the set temperature prior to the
self-test, everything is ok.
If the super display 3 flashes for
10 seconds, an error has occurred.
Inform customer service.
Ending the appliance self-test
When the programme has ended, the
appliance switches over to normal
operation.
Customer service
Your local customer service
can be found in the telephone directory
or in the customer-service index. Please
provide customer service
with the appliance product number
(E-Nr.) and production number (FD).
These specifications
can be found on the rating plate. Fig.
+
To prevent unnecessary call-outs, please
assist customer service by quoting
the product and production numbers.
This will save you additional costs.
Repair order and advice
on faults
Contact information for all countries can
be found on the enclosed customer
service list.
Fault Possible cause Remedial action
Appliance is not cooling,
temperature display and light
are lit.
Showroom mode is
switched on.
Start appliance self-test (see chapter
“Appliance self-test”).
When the programme has ended,
the appliance switches over to normal
operation.
GB 0844 892 8999 Calls from a BT
landline will be
charged at up to
3 pence per minute.
A call set-up fee of
up to 6 pence may
apply.
IE 01450 2655 0.03 € per minute
at peak. Off peak
0.0088 € per
minute.
US 866 447 4363 toll-free