Positioning and connecting
en
17
Hose and cable lengths
Connection on left side
or
Connection on right side
Note:
If the supply hose is too short for
your connection, you can order an
extension from the after-sales service.
Slide in installation
For a slide in or build under Installation
the appliance cover plate can be
removed.
The appliance must be built under or
built in prior to connecting to the power
supply.
The appliance can be built into or under
a kitchen work surface. For this
purpose, a recess width of 60 cm is
required.
Note:
■
The washing machine must only be
installed under a one-piece worktop
that is permanently attached to the
surrounding cabinets.
■
For safety reasons in build-under
installation, a metal cover must be
assembled by a specialist in place of
the appliance cover plate.
■
The metal cover can be obtained
from the Customer Service (order
no. 20002788).
Water inlet
:
Warning
Risk of death!
There is a risk of electric shock if you
touch live components.
Do not immerse the Aqua-Stop safety
valve* in water (it contains an electric
valve).
* Depending on the model
Observe the following when connecting
the appliance:
Notes
■
Only operate the appliance using
cold mains water.
■
Do not connect the appliance to the
mixer tap of an unpressurised hot-
water boiler.
(
~ 140 cm
0
~ 140 cm
8
~ 60 cm
@
0 cm ~ 100 cm
(
~ 94 cm
0
~ 195 cm
8
~ 100 cm
@
0 cm ~ 100 cm
#
#
Summary of Contents for iQ300 WD14S4 Series
Page 55: ...6 ...
