Siemens iQ300 EH LD Series, Instruction Manual, Page: 10 / 36

en
Getting to know your appliance
10
The hotplates
Residual heat indicator
The hob has a residual heat indicator for each hotplate.
This indicates that a hotplate is still hot. Do not touch a
hotplate while the residual heat indicator is lit up.
The following indicators are shown depending on the
amount of residual heat:
■
Display
•
: High temperature
■
Display
œ
: Low temperature
If you remove the cookware from the hotplate during
cooking, the residual heat indicator and the selected
heat setting will flash alternately.
When the hotplate is switched off, the residual heat
indicator will light up. Even after the hob has been
switched off, the residual heat indicator will stay lit for as
long as the hotplate is still warm.
Hotplates
$
Simple hotplate Use cookware that is a suitable size
ò
Tri-circuit hotplate The hotplate switches on automatically when you use cookware with a base that covers the outer edge of
the zone ( ð or ò ).
Only use cookware that is suitable for induction cooking; see section
~
"Induction cooking"