![Siemens IQ100 KI86V Series User Manual Download Page 19](http://html.mh-extra.com/html/siemens/iq100-ki86v-series/iq100-ki86v-series_user-manual_379259019.webp)
Cleaning and servicing
en
19
1.
Switch on the Super function ap-
prox. four hours before defrosting.
→
"Switching on Super function",
This means that the food reaches
very low temperatures and it can
be stored for longer at room tem-
perature.
2.
Remove the frozen food container
with the frozen food and temporar-
ily place it in a cool location. Place
ice packs (if available) on the
frozen food.
3.
4.
Disconnect the appliance from the
power supply.
Unplug the appliance from the
mains or switch off the circuit
breaker in the fuse box.
5.
To accelerate the defrosting pro-
cess, place a pan of hot water on
a trivet in the freezer compartment.
6.
Wipe up the condensation water
with a soft cloth or sponge.
7.
Rub the freezer compartment dry
with a soft, dry cloth.
8.
Electrically connect the appliance.
9.
10.
Reinsert the frozen food containers
with the frozen food.
Cleaning and servicing
13 Cleaning and servi-
cing
Cleaning and servicing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
Customer Service must clean inac-
cessible points. Cleaning by cus-
tomer service can give rise to costs.
13.1 Preparing the appliance
for cleaning
1.
2.
Disconnect the appliance from the
power supply.
Unplug the appliance from the
mains or switch off the circuit
breaker in the fuse box.
3.
Take out all of the food and store it
in a cool place.
Place ice packs (if available) onto
the food.
4.
If there is a layer of hoarfrost, allow
this to defrost.
5.
Remove all fittings and accessor-
ies from the appliance.
→
13.2 Cleaning the appliance
WARNING
Risk of electric shock!
An ingress of moisture can cause an
electric shock.
▶
Do not use steam- or high-pres-
sure cleaners to clean the appli-
ance.
Liquid in the lighting or in the con-
trols can be dangerous.
▶
The rinsing water must not drip
into the lighting or controls.
ATTENTION!
Unsuitable cleaning products may
damage the surfaces of the appli-
ance.
▶
Do not use hard scouring pads or
cleaning sponges.
▶
Do not use harsh or abrasive de-
tergents.
▶
Do not use cleaning products with
a high alcohol content.