Siemens INOX PRO SIMATIC IPC277D Operating Instructions Manual Download Page 94

Page: 94 / 182

Device maintenance and repairs

8.4 Installing the software

SIMATIC IPC277D

Operating Instructions, 12/2016, A5E03409486-AE

8.4.1.3

Installing Windows XP

Note
Specific information on the use of the Windows XP Professional operating system is

available in the following manual (not included in the scope of delivery):
Microsoft Windows XP Professional, Technical Reference (MSPress No. 934)

Requirement

You need the following hardware and software:

●

A USB DVD-ROM drive

●

A USB disk drive

●

A USB hub

●

Driver disk for the AHCI controller

You will find information on setting up the driver disk on the "Documentation and Drivers"

CD/DVD.

●

Recovery DVD for the operating system you want to install, which is included in the scope

of delivery.

Procedure

Enable "USB Boot" in the BIOS setup.

Connect the disk drive to the USB port.

Insert the driver disk into the disk drive.

Connect the DVD drive to the USB port.

Insert the Recovery DVD into the DVD drive.

Reboot the device.

Press the <F12> key when the following BIOS message appears.

Press F2 to go to Setup Ulility

Press F12 to go to Boot Manager

After initialization, a boot menu is displayed.

In the boot menu, select the optical drive using the cursor keys.
Example:

USB-ODD : Optical Disk Drive

Confirm the selection by pressing ENTER.

Summary of Contents for INOX PRO SIMATIC IPC277D























































































































































































Search results

Summary of Contents for INOX PRO SIMATIC IPC277D

Reviews:

Related manuals for INOX PRO SIMATIC IPC277D

Brands by name

Popular brands

Siemens INOX PRO SIMATIC IPC277D, Operating Instructions Manual

Search results

Summary of Contents for INOX PRO SIMATIC IPC277D

Reviews:

Related manuals for INOX PRO SIMATIC IPC277D

Brands by name

Popular brands