Siemens INOX PRO SIMATIC IPC277D Operating Instructions Manual Download Page 144

Page: 144 / 182

Technical specifications

9.6 BIOS description

SIMATIC IPC277D

144

Operating Instructions, 12/2016, A5E03409486-AE

9.6.3.5

Power menu

The reaction of the device to a power failure and after wake events is specified in this menu.

Entry in the Power menu

Entry

Meaning

Wake on LAN 2

If activated <Enabled>, the device powers on when a wake event

occurs. Otherwise, the device remains switched off.

CMOS battery present

This function indicates to the system whether a CMOS battery is

being used. Enable this function with "Yes" if a CMOS battery has

been installed. Disable this function with "No" if no CMOS battery

has been installed.

Summary of Contents for INOX PRO SIMATIC IPC277D























































































































































































Search results

Summary of Contents for INOX PRO SIMATIC IPC277D

Reviews:

Siemens INOX PRO SIMATIC IPC277D, Operating Instructions Manual, Page: 144 / 182

Search results

Summary of Contents for INOX PRO SIMATIC IPC277D

Reviews: