Technical information
7.1 Certificates and approvals
Industrial Flat Panel IFP1500, IFP1900, IFP2200, IFP1900 PRO, IFP2200 PRO, IFP1900 ETH, IFP2200 ETH
78
Operating Instructions, 07/2016, A5E31298376-AF
UL approval
Underwriters Laboratories Inc., to
●
UL 508 (Industrial Control Equipment)
●
CSA C22.2 No. 142 (Process Control Equipment)
or
Underwriters Laboratories Inc., to
●
UL 508 (Industrial Control Equipment)
●
CSA C22.2 No. 142 (Process Control Equipment)
●
ANSI/ISA 12.12.01 (Hazardous Location)
●
CSA-213 (Hazardous Location)
Approved for use in
●
Class I, Division 2, Group A, B, C, D or
●
Class I, Zone 2, Group IIC or
●
non-hazardous locations
FM Approval
Factory Mutual Research (FM) conforming to
●
Approval standards FM 3611, FM 3600, FM 3800, ANSI/ISA 61010-1
●
CSA C22.2 No. 213
●
CSA C22.2 No. 1010.1
Approved for use in
●
Class I, Division 2, Group A, B, C, D T4
●
Class I, Zone 2, Group IIC T4
Ex approval
The following approvals apply to the device in accordance with
●
IEC 60079-0:2011 and EN 60079-0:2012
●
IEC 60079-15:2010 and EN 60079-15:2010
●
IEC 60079-31: 2008 and EN 60079-31:2009
valid:
II 3 G
Ex nA IIC Tx Gc
II 3 D
Ex tc IIIC T 70 °C Dc IP65
x: Temperature values, see EC design examination certificate
The EC type examination certificates are available on the Internet at:
Technical Support (
