Application and properties
1.2 Communication services and other properties
IE/PB LINK PN IO
Operating Instructions, 11/2017, C79000-G8976-C393-02
15
1.2
Communication services and other properties
Communication services
Industrial Ethernet
●
PROFINET IO
The LINK can be configured as an IO device.
●
IP configuration - IPv4
The essential features of IP configuration for the LINK:
–
The LINK supports IP addresses according to IPv4.
–
Address assignment:
The IP address, the subnet mask and the address of a gateway can be set manually
in the configuration.
As an alternative, the IP address can be obtained from a DHCP server or by other
means outside the configuration.
●
Media redundancy (MRP)
Within an Ethernet network with a ring topology, the LINK supports the media redundancy
protocol MRP. You can assign the role of "Client" to the LINK.
●
SNMP
As an SNMP agent, the LINK supports data queries using SNMP (Simple Network
Management Protocol).
For more detailed information, refer to section SNMP (Page 75).
●
LLDP
The LINK supports the Link Layer Discovery Protocol.
PROFIBUS
●
Supported slaves:
–
Slaves according to DP V0
–
Slaves according to DP V1
●
Direct data exchange
The LINK supports direct data exchange in its own DP Master system and in multimaster
systems.
●
PROFISAFE
The LINK supports applications with PROFISAFE.
