en
Rails
24
15.2 Cleaning the cooking compartment
after using it
ATTENTION!
If the cooking compartment remains damp for too long,
this results in corrosion.
▶
After using the cleaning aid, wipe the cooking com-
partment and allow it to dry completely.
Requirement:
The cooking compartment has cooled
down.
1.
Open the appliance door and absorb the residual
water with an absorbent sponge cloth.
2.
Clean smooth surfaces in the cooking compartment
with a dish cloth or a soft brush. Remove stubborn
residues with a stainless steel spiral scourer.
3.
Remove limescale deposits using a vinegar-soaked
cloth. Wipe this away with clear water and use a soft
cloth to also rub underneath the door seal dry.
4.
Once the cooking compartment is sufficiently clean:
‒
In order to cool the cooking compartment, leave
the appliance door open in the detent position
for approx. one hour.
‒
To dry the cooking compartment more quickly,
heat up the appliance with the door open with
3D
hot air
and 50 °C for approx. five minutes.
16 Rails
To clean the rails and cooking compartment thor-
oughly, you can remove the shelf supports.
16.1 Unhooking the rails
WARNING ‒ Risk of burns!
The rails can be very hot.
▶
Never touch the rails when they are hot.
▶
Allow the appliance to cool down.
▶
Keep children at a safe distance.
1.
Lift the front rail upwards and unhook it.
2.
Then push the entire rail to the front and remove it.
16.2 Attaching the rails
1.
First insert the rail into the rear socket, press it to
the back slightly
2.
and insert it into the socket at the front.
The rails fit both on the left and right sides. Shelf po-
sitions 1 and 2 are located at the bottom and shelf
positions 3, 4 and 5 are located at the top.
