en
Home Connect
22
Display
Selection
Brightness
¡
Levels 1, 2, 3, 4 and 5
1
Standby
screen
¡
On for a limited time
1
¡
Off
Clock
¡
D date
1
¡
Digital
¡
Analogue
Adjustment
¡
Align the display horizontally and
vertically
1
Factory setting (may vary according to model)
Tone
Selection
Button tone
¡
On
1
¡
off
Signal tone
¡
Very short duration
¡
Short duration
¡
Medium duration
1
¡
Long duration
1
Factory setting (may vary according to model)
Appliance set-
tings
Selection
Fan run-on
time
¡
Minimum
¡
Recommended
1
¡
Long
¡
Very long
Pull-out system
¡
Retrofitted (if 2 or 3 sets of pull-
out rails are fitted)
¡
Not retrofitted (if shelf supports
and a single set of pull-out rails
are fitted)
1
Lighting
¡
On when cooking and opening
the door
1
¡
Only when the door is opened
¡
Always off
Water hard-
ness
¡
4 (very hard)
1
¡
3 (hard)
¡
2 (medium)
¡
1 (soft)
¡
0 (softened)
1
Factory setting (may vary according to model)
Personalisa-
tion
Selection
Brand logo
¡
Display
1
¡
Do not display
Operation after
switch-on
¡
Main menu
1
¡
Types of heating
¡
Steaming
¡
Dishes
¡
Favourites
Elapsed cook-
ing time
¡
Display
1
¡
Do not display
Dishes
¡
All
1
¡
No pork
¡
Kosher only
Regional
dishes
¡
All
1
¡
European dishes
¡
British dishes
Childproof
lock
¡
Keylock only
1
¡
Deactivated
Automatic
rapid heating
¡
On
1
¡
Off
1
Factory setting (may vary according to model)
Factory set-
tings
Selection
Factory set-
tings
¡
Restore
Appliance in-
formation
Appliance information
15.2 Changing the basic settings
1.
Press in the status bar.
2.
Press the required basic setting area.
3.
Press the required basic setting.
4.
Press to select the required basic setting.
a
The change is applied directly for most basic set-
tings.
5.
To change additional basic settings, use
to go
back and select a different basic setting.
6.
To exit the basic settings, use
to go back to the
main menu or switch off the appliance using .
a
The changes are saved.
Note:
Your changes to the basic settings will be re-
tained even after a power failure.
16 Home Connect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the Home Connect app, adjust its basic settings
and monitor its operating status.
The Home Connect services are not available in every
country. The availability of the Home Connect function
depends on the availability of Home Connect services
in your country. You can find information about this at:
www.home-connect.com.
The Home Connect app guides you through the entire
login process. Follow the instructions in the Home Con-
nect app to configure the settings.
Tips
¡
Please consult the documents supplied by
Home Connect.
¡
Please also follow the instructions in the Home Con-
nect app.
Notes
¡
Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the Home Con-
nect app.
