en
Accessories
10
Lighting
The oven light lights up the cooking compartment.
With most types of heating and functions, the lighting
lights up during operation. The lighting goes off when
operation ends.
You can switch on the lighting without heating the oven
using the
Oven light
button.
Cooling fan
The cooling fan switches on and off depending on the
appliance's temperature. The hot air escapes above
the door.
ATTENTION!
Do not cover the ventilation slot above the appliance
door. The appliance overheats.
▶
Ensure that the ventilation slots are unobstructed.
To ensure that the appliance cools down more quickly
after operation, the cooling fan continues to run for a
certain period afterwards.
Appliance door
If you open the appliance door during operation, the
appliance stops heating. When you close the appliance
door, the appliance continues to heat again.
5 Accessories
Use original accessories. These have been made espe-
cially for your appliance.
Note:
Accessories may become deformed if they get
hot. Deformation has no effect on function. As the ac-
cessory cools down, it will regain its original shape.
The accessories supplied may differ depending on the
appliance model.
Accessories
Use
Wire rack
¡
Cake tins
¡
Ovenproof dishes
¡
Cookware
¡
Meat, e.g. roasting joints or steak
¡
Frozen meals
Universal pan
¡
Moist cakes
¡
Baked items
¡
Bread
¡
Large roasts
¡
Frozen meals
¡
Catching dripping liquids, e.g. fat when
grilling food on the wire rack.
Meat thermometer
High-precision roasting or cooking.
5.1 Locking function
The locking function prevents the accessories from tilt-
ing when they are pulled out.
You can pull out the accessories approximately halfway
without them tipping. The accessories must be inserted
into the cooking compartment correctly for the tilt pro-
tection to work properly.
5.2 Sliding accessories into the cooking
compartment
Always slide accessories into the cooking compartment
correctly. This is the only way to ensure that accessor-
ies can be pulled out approximately halfway without tip-
ping.
1.
Turn the accessories so that the notch is at the
rear and is facing downwards.
2.
Insert accessories between the two guide rods for
the shelf position.
Wire rack
Insert the wire rack with the open
side facing the appliance door and
the curved lip facing downwards.
