Basic settings
en
23
20 Basic settings
You can configure the basic settings for your appliance to meet your needs.
20.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display
Basic setting
Selection
Signal duration upon completion of a
cooking time or timer period
= 10 seconds
= 30 seconds
1
= 2 minutes
Waiting time until a setting is adop-
ted
= 3 seconds
1
= 6 seconds
= 10 seconds
Acoustic signal when a button is
pressed
= off
= on
1
Brightness of the display illumination
= dark
= medium
1
= bright
Childproof lock can be adjusted
= no
= yes
1
= yes, with door lock
Interior lighting during operation
= no
= yes
1
Cooling fan run-on time
= short
= medium
1
= long
= extra long
Telescopic shelves retrofitted
2
= no
1
(for rails and 1-level pull-out)
= yes (for 2- and 3-level pull-out)
Reset all values to factory settings
= no
1
= yes
1
Factory setting (may vary according to model)
2
Depending on the appliance specifications
20.2 Changing basic settings
Requirement:
The appliance is switched off.
1.
Press and hold the button for approx.
four seconds.
a
The first basic setting appears in the display,
e.g. .
2.
Use the or button to change the setting.
3.
Use the button to switch to the next basic setting.
4.
To save the changes, press and hold for approx.
four seconds.
Note:
Your changes to the basic settings will be re-
tained even after a power failure.
20.3 Discarding changes to the basic
settings
▶
Turn the function selector.
a
All changes are discarded and not saved.