Siemens HiPath Series User Manual Download Page 55

Page: 55 / 62

HSAAP_Getting_Started.fm

A31003-W1110-U101-1-7619, February 2007
HiPath Wireless Standalone Access Point V1.0, Getting Started Guide

Getting started with a Standalone Access Point

Downloading the firmware

In the

New Password

box, type the new password.

In the

Confirm New Password

box, re-type the new password.

To save your changes, click

Save

5.4

Downloading the firmware

Use the

Firmware/Language

screen to download Standalone Access Point firmware.

To download firmware:

On the menu bar, click

Tools

In the left pane, click

Firmware/Language

In the

Download Firmware from

section, click

Browse

to navigate to the appropriate file.

Select the file to download, and then click

Open

in the

Choose file

dialog box. The

directory location is displayed in the

Download Firmware from

box.

Click

Download and Reboot

. The selected file is downloaded and the Standalone Access

Point is rebooted.

Summary of Contents for HiPath Series































































Search results

Summary of Contents for HiPath Series

Reviews:

Related manuals for HiPath Series

Brands by name

Popular brands

Siemens HiPath Series, User Manual

Search results

Summary of Contents for HiPath Series

Reviews:

Related manuals for HiPath Series

Brands by name

Popular brands