hwc_apstartup.fm
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
81
Configuring the wireless AP
Modifying wireless AP settings
3.
In the
Serial #
box, type the unique identifier.
4.
From the
Hardware Type
drop-down list, select the hardware type of the Wireless AP.
5.
In the
Name
box, type a unique name for the Wireless AP.
6.
In the
Description
box, type descriptive comments for the Wireless AP.
7.
In the
Port #
drop-down list, select the Ethernet port through which the Wireless AP can
be reached.
8.
Click
Add Wireless AP
. The wireless AP is added and registered.
9.
Click
Close
.
5.5
Modifying wireless AP settings
Wireless APs are added with default settings, which you can adjust and configure according to
your network requirements. In addition, you can modify the properties and the settings for each
radio on the wireless AP.
You can also locate and select APs in specific registration states to modify their settings. For
example, this feature is useful when approving pending APs when there are a large number of
other APs that are already registered. From the Access Approval screen, the administrator can
click
Pending
to select all pending APs, then click
Approve
to approve all selected APs.
Summary of Contents for HiPath C10
Page 299: ......
