Availability, mobility, and controller functionality
A31003-W1040-U101-1-7619, July 2006 DRAFT
210
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
hwc_controlleravailmobility.fm
Using controller utilities
●
Read/Write Community Name
– Specifies the community name for users with read
and write privileges
●
SNMP Trap Port
– Specifies the destination port for SNMP traps. The industry
standard is 162. If left blank, no traps are generated.
●
Forward Traps
– Specifies the security level of the traps to be forwarded. From the
drop-down list, select I
nformational
,
Minor
,
Major
, or
Critical
.
●
Manager A
– Specifies the IP address of the specific machine on the network where
the SNMP traps are monitored
●
Manager B
– Specifies the IP address of a second machine on the network where the
SNMP traps are monitored, if Manager A is not available
8.7
Using controller utilities
You can use HiPath Wireless Controller utilities to test a connection to the target IP address or
to record the route through the Internet between your computer and the target IP address.
To test or record IP address connections:
1.
From the main menu, click
Wireless Controller Configuration
. The
Wireless Controller
Configuration
screen appears.
2.
In the left pane, click
Utilities
. The
Wireless Controller Utilities
screen appears.
3.
In the
Target IP Address
box, type the IP address of the destination computer.
4.
To test a connection to the target IP address, click
Ping
.
5.
To record the route through the Internet between your computer and the target IP address,
click
Trace Route
.
The following shows an example screen after clicking the
Trace Route
button.
>
For security purposes, it is recommended that you immediately change the Read
Community Name (public) and the Read/Write Community Name (private) to names
that are less obvious and more secure.
Summary of Contents for HiPath C10
Page 299: ......
