Siemens HiPath C10 User Manual Download Page 192

Page: 192 / 300

Availability, mobility, and controller functionality

A31003-W1040-U101-1-7619, July 2006 DRAFT

192

HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide

hwc_controlleravailmobility.fm

Availability overview

An alternate method to setting up APs includes:

Add each wireless AP manually to each HiPath Wireless Controller.

From the AP Properties screen, click

Add Wireless AP

Define the wireless AP and click

Add Wireless AP

Manually defined APs will inherit the AP default configuration settings.

To set the primary or secondary HiPath Wireless Controllers for availability:

From the main menu, click

Wireless AP Configuration

. The

Wireless APs

screen

appears.

In the left pane, click

AP Registration

. The

Wireless AP Registration

screen appears.

To enable availability, select the

Paired

option.

If two HiPath Wireless Controllers are paired and one has the Allow All option
set for Wireless AP registration, all Wireless APs will register with that HiPath
Wireless Controller.

Summary of Contents for HiPath C10













































































































































































































































































































Search results

Summary of Contents for HiPath C10

Reviews:

Related manuals for HiPath C10

Brands by name

Popular brands

Siemens HiPath C10, User Manual

Search results

Summary of Contents for HiPath C10

Reviews:

Related manuals for HiPath C10

Brands by name

Popular brands