hwc_vnsconfiguration.fm
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
177
Virtual Network configuration
Defining priority level for VNS traffic
●
Private Branch Exchange (PBX)
– A private telephone system within an enterprise, with
such features as voicemail.
●
Telephony Gateway
– For access to an external standard telephone network, such as the
wireless cellular network or the public switched telephone network (PSTN). The Telephony
Gateway should be located on the same subnet as the HiPath Wireless Controller.
For large deployments, an SVP server is required on the enterprise network if Spectralink
devices are to be supported.
To configure the VNS for voice-over-IP traffic:
1.
From the main menu, click
Virtual Network Configuration
. The Virtual Network
Configuration screen appears.
2.
In the left pane Virtual Networks list, click the VNS you want to configure for voice-over-IP
traffic. The Topology tab is displayed.
3.
From the
Assignment by
drop-down list, select
SSID
.
4.
Click the
Auth & Acct
tab.
5.
Click
Configure Captive Portal Settings
. The Captive Portal Configurations subscreen
appears.
6.
Select
No Captive Portal Support
,
and then click
Save
. No authentication is used since
wireless telephone users do not have a user interface in which they can enter
authentication identification.
7.
Click the
Multicast
tab.
8.
Select
Enable Multicast Support
. Several VoIP implementations use multicast for their
operations:
●
Device Discovery and registration
●
Push-to-talk feature/Group talk feature
9.
Do one of the following:
●
Select
IP Group
and define the multicast groups by typing the IP address range in the
IP Group
box.
●
Select
Defined groups
and select the predefined multicast group from the
Defined
groups
drop-down list. For example, Spectralink-enabled devices using the SVP
Protocol.
10. Click the
Filtering
tab.
Summary of Contents for HiPath C10
Page 299: ......
