manualshive.com logo in svg

Siemens HiPath 8000, Administrator'S Manual

The Siemens HiPath 8000 is a cutting-edge communication system designed for seamless connectivity in organizations. For an in-depth understanding of its features and functionalities, the comprehensive Operating Manual is available for free download from manualshive.com. Explore the manual to optimize your experience with this advanced communication solution.

Share
Download
background image

Technical Overview

44

IP Network Configuration

Routing

The phone allows a default route to be configured to allow access to Serv-

ers on a different subnet to the one in which the phone resides. In addition 

it is possible to configure 2 additional routes. Each route consists of a IP 

address, gateway and mask.

Virtual LAN (VLAN)

VLAN or virtual LAN is a technology that allows network administrators to 

partition one physical network into a set of virtual networks (or broadcast 

domains).

Physically partitioning the LAN into separate VLANs allows a network ad-

ministrator to build a more robust network infrastructure. A good example 

is of the data and voice networks being partitioned into data and voice 

VLANs. This isolates the two networks and helps shield the endpoints 

within the voice network from disturbances in the data network and vice 

versa.

VLAN is a layer 2 (Physical Layer) protocol. In the case of Ethernet the 

physical header is extended allowing endpoints to be not only be ad-

dressed via MAC address, but also VLAN ID 

Æ

page 203. Ethernet VLANs 

support the partitioning of a physical LAN into up to 4095 virtual LANs.

To implement a voice network based on VLANs requires the network infra-

structure (the switch fabric) to support VLANs at layer 2. Dependant on the 

overall architecture it may or may not be necessary for the endpoint 

(phone) to support layer 2 VLAN. 

The ports of the network switches in the switch fabric can be logically 

grouped as ports belonging to particular VLAN. The switch only forwards 

traffic to a particular port if that port is a member of the VLAN that the traf-

fic is allocated to. In this way an endpoint connected to a particular port on 

the switch is automatically a member of that VLAN without being a VLAN 

aware device; the switch ensures the endpoint only receives traffic for that 

VLAN and ensures traffic from the endpoint is only forwarded to ports that 

are configured to be in the same VLAN. This is known as port based VLAN 

in the switch world.

When multiple endpoints are connected to a single network switch port 

and these endpoints belong to multiple VLANs then a different approach is 

needed to implement a VLAN based topology. A typical example or this is 

a phone with a PC connected behind the phone. The phone would be a 

member of the Voice VLAN and the PC a member of the  data VLAN. In 

this case the Phone must be configured as a VLAN aware endpoint.

Summary of Contents for HiPath 8000


























































































































































































































































Reviews:

No comments

Related manuals for HiPath 8000

GAI-Tronics 1114 Installation And User Manual preview
1114
Brand: GAI-Tronics Pages: 32
Pantech Pocket Guías Del Usuario Manual preview
Pocket
Brand: Pantech Pages: 116
Grandstream Networks GXV3240D Administration Manual preview
GXV3240D
Brand: Grandstream Networks Pages: 84
Bauhn Sphere AAP553G-315 Instruction Manual preview
Sphere AAP553G-315
Brand: Bauhn Pages: 40
OneTouch Flash Mini 4031D Quick Start Manual preview
Flash Mini 4031D
Brand: OneTouch Pages: 21
STK Professional Audio SYNC5.5 Quick Start Up Manual preview
SYNC5.5
Brand: STK Professional Audio Pages: 13
Tesla 6.2 LITE Quick Start Manual preview
6.2 LITE
Brand: Tesla Pages: 3
Zte R226-Z Quick Start Manual preview
R226-Z
Brand: Zte Pages: 24
Zte Q210 Quick Start Manual preview
Q210
Brand: Zte Pages: 24
Zte F930 User Manual preview
F930
Brand: Zte Pages: 112
Zte Blade L210 Quick Start Manual preview
Blade L210
Brand: Zte Pages: 10
AMGOO AM355 Manual preview
AM355
Brand: AMGOO Pages: 14
AU E08T Basic Manual preview
E08T
Brand: AU Pages: 55
Blackberry 8120 - Pearl - GSM Safety And Product Information preview
8120 - Pearl - GSM
Brand: Blackberry Pages: 33
Dukane 4A3610B Operation Manual preview
4A3610B
Brand: Dukane Pages: 148
Nokia 3360 - Cell Phone - AMPS User Manual preview
3360 - Cell Phone - AMPS
Brand: Nokia Pages: 178
Rath 2100-PLL Landline 12v Pedestal Installation & Operation Manual preview
2100-PLL Landline 12v Pedestal
Brand: Rath Pages: 9
Stanley S241 Quick Start Manual preview
S241
Brand: Stanley Pages: 4

Brands by name

Popular brands

Load more brands