Siemens HiPath 8000 Administrator'S Manual Download Page 43

Page: 43 / 249

Technical Overview

SNTP

The phone support

SNTP. The SNTP server address can be supplied via

DHCP or manually configured

page 219. If the SNTP server address is

available the server will be queried for the time. If a server address is not

configured the phone will look for SNTP broadcasts and setup the time ac-

cordingly, if these are received any manually configured time and date in-

formation would be over written.

SNMP

The phone provides

SNMP which allows network related information to

be browsed (MIB II support). Standard SNMP browsers are sufficient for

this purpose.

Summary of Contents for HiPath 8000


























































































































































































































































Search results

Summary of Contents for HiPath 8000

Reviews:

Related manuals for HiPath 8000

Brands by name

Popular brands

Siemens HiPath 8000, Administrator'S Manual

Search results

Summary of Contents for HiPath 8000

Reviews:

Related manuals for HiPath 8000

Brands by name

Popular brands