Siemens HiPath 8000 Administrator'S Manual Download Page 19

Page: 19 / 249

Installation

Prerequisites

The advance acts as an endpoint client on an IP telephony network, and

has the following network requirements:

• An Ethernet connection to a network with SIP clients and servers (re-

quired).

• A Dynamic Host Configuration Protocol (DHCP) server (optional).

• Either a Call Control System

– Proxy server — There must be a device running RFC 3261 SIP-com-

pliant software.

– Voice packet gateway (optional) — Required if your VOIP Network is

connected to the Public Switched Telephone Network (PSTN).

• or a voice packet gateway if the phone is used in gateway routing mode

page 216.

Connecting to the Network

The advance has two RJ-45 ports labelled “10/100 LAN” and “10/100 PC.”

Each port supports 10/100 Mbps half- or full-duplex connections.

We recommend that you use the port setting "Auto"

page 194 on all

ports for auto detection of transferring speed and type of connected cable

(either straight-through or crossed).

You have to connect the advance first to the LAN and then to the

power supply.

Summary of Contents for HiPath 8000


























































































































































































































































Search results

Summary of Contents for HiPath 8000

Reviews:

Related manuals for HiPath 8000

Brands by name

Popular brands

Siemens HiPath 8000, Administrator'S Manual

Search results

Summary of Contents for HiPath 8000

Reviews:

Related manuals for HiPath 8000

Brands by name

Popular brands