Siemens HiPath 4000 Operation Manual Download Page 25

Page: 25 / 164

Getting to Know Your OpenStage Phone

Telephony dialogs

The dialogs in the lower area of the display prompt you to input data or pro-
vide you with information about the call states.

Example: In idle state, enter a phone number using the dialpad.

The pop-up menu (

page 26) provides functions suited to the situation,

which you can select and confirm using the TouchGuide

page 18.

Messages

The messages displayed in the upper left area of the display advise you of
current settings or events.

Example:
•

Call forwarding is activated for all calls. All calls are forwarded to the
number "220870".

•

You received a callback request in your absence.

•

A call list contains a new entry

Explanation of all message icons:

Icon

Explanation

You have received one or more new messages

One or more new entries have been added to the call lists

Call forwarding is active

Dial again?
Direct call pickup?

22|

Digits already entered

Dial the phone number

Cancel entry

Saved callbacks

Activated call forwarding
Call list entry

Summary of Contents for HiPath 4000





































































































































































Search results

Summary of Contents for HiPath 4000

Reviews:

Related manuals for HiPath 4000

Brands by name

Popular brands

Siemens HiPath 4000, Operation Manual

Search results

Summary of Contents for HiPath 4000

Reviews:

Related manuals for HiPath 4000

Brands by name

Popular brands